Pass Guaranteed Unparalleled Fire-Inspector-II - 67 - Fire Inspector II Exam Hot Questions

Once you ensure your grasp on the Fire-Inspector-II questions and answers, evaluate your learning solving the Fire-Inspector-II practice tests provided by our testing engine. This innovative facility provides you a number of practice questions and answers and highlights the weak points in your learning. You can improve the weak areas before taking the actual test and thus brighten your chances of passing the Fire-Inspector-II Exam with an excellent score. Moreover, doing these practice tests will impart you knowledge of the actual Fire-Inspector-II exam format and develop your command over it.

Fire-Inspector-II practice materials stand the test of time and harsh market, convey their sense of proficiency with passing rate up to 98 to 100 percent. Easily being got across by exam whichever level you are, our Fire-Inspector-II practice materials have won worldwide praise and acceptance as a result. They are 100 percent guaranteed Fire-Inspector-II practice materials. The content of Fire-Inspector-II practice materials are based on real exam by whittling down superfluous knowledge without delinquent mistakes rather than dropping out of reality. Being subjected to harsh tests of market, they are highly the manifestation of responsibility carrying out the tenets of customer oriented

>> Fire-Inspector-II Hot Questions <<

2025 International Code Council Fire-Inspector-II: 67 - Fire Inspector II Exam –Trustable Hot Questions

One year free update for Fire-Inspector-II pdf torrent is available, and you do not worry about missing the updated International Code Council Fire-Inspector-II study dumps. In addition, the content of Fire-Inspector-II pdf download cover almost the key points which will be occurred in the actual test. Besides, you can install your Fire-Inspector-II Online Test engine on any electronic device, so that you can study at anytime and anywhere.Thus your time is saved and your study efficiency is improved. Our Fire-Inspector-II Fire-Inspector-II can ensure you 100% pass.

International Code Council 67 - Fire Inspector II Exam Sample Questions (Q71-Q76):

NEW QUESTION # 71
The minimum working space width for a 66-in. wide electrical equipment panel shall be in

A. 0
B. 1
C. 2
D. 3

Answer: C

Explanation:
Minimum Working Space Width for Electrical Equipment Panels
According to National Electrical Code (NEC) 110.26(A)(2) and International Fire Code (IFC) 2021, Section
604.3, the minimum working space width for electrical equipment must be at least the width of the equipment or 30 inches, whichever is greater.
Since the equipment panel in the question is 66 inches wide, the required working space width must be at least 66 inches.
2. Why 66 Inches is the Correct Answer
The minimum clearance width must be equal to the width of the electrical equipment if the panel itself is wider than 30 inches.
This ensures safe maintenance and emergency access to electrical components.
3. Verification of Other Options
Option A (30 inches) - Incorrect, because the equipment is wider than 30 inches, requiring a larger clearance.
Option B (36 inches) - Incorrect, as this is not the requirement for a 66-inch-wide panel.
Option D (78 inches) - Incorrect, as the clearance does not need to exceed the width of the panel.
Reference Sources:
National Electrical Code (NEC) 2023 - Section 110.26(A)(2) (Working Space Width Requirements) International Fire Code (IFC) 2021 - Section 604.3 (Electrical Equipment Clearance Requirements) ICC Fire Inspector II Study Guide (2021)

NEW QUESTION # 72
Panic hardware is required on exit doors serving an occupant load of __ or more in a Group __ Occupancy

A. 100; F
B. 10; A
C. 50; M
D. 50; A

Answer: D

Explanation:
The requirement for panic hardware on exit doors is specified in 2021 IFC Section 1010.2.9 - Panic and Fire Exit Hardware.
IFC Section 1010.2.9.1 - Where Panic Hardware is Required:
Panic hardware is required for Group A (Assembly) occupancies when the occupant load is 50 or more.
It is also required in certain Group E (Educational) and Group R-1 (Hotels and Dormitories) occupancies under specific conditions.
Why Other Options Are Incorrect?
A: 10; A - The threshold for panic hardware in Group A occupancies is 50, not 10.
C: 50; M - Group M (Mercantile) does not require panic hardware unless specifically required by another section of the code.
D: 100; F - Panic hardware is not required in Group F (Factory) occupancies at 100 occupants; the threshold applies primarily to Group A.

NEW QUESTION # 73
What fire-resistance rating is required for interior nonbearing walls and partitions in Type IV construction?

A. 1-1/2 hours
B. 0 hours
C. 2 hours
D. 1 hour

Answer: B

Explanation:
Fire-Resistance Rating for Nonbearing Walls in Type IV Construction
Type IV (Heavy Timber) construction, as defined by the International Building Code (IBC) 2021, Section
602.4, consists of large, solid or laminated wood members.
Interior nonbearing walls and partitions in Type IV construction are not required to have a fire-resistance rating (0 hours) unless they separate different occupancies or are specifically mandated by another code provision.
2. Why Type IV Does Not Require a Rating for Nonbearing Walls
The heavy timber components inherently provide fire resistance due to their large cross-section, which chars on the surface and slows fire penetration.
IBC Table 601 confirms that interior nonbearing walls in Type IV construction do not have a required fire- resistance rating.
3. Verification of Other Options
Option B (1 hour) - Incorrect, as Type IV does not require a 1-hour rating for interior nonbearing walls unless specific conditions apply.
Option C (1-1/2 hours) - Incorrect, as there is no code requirement for this level of rating in Type IV nonbearing walls.
Option D (2 hours) - Incorrect, as Type IV walls are not rated unless separating occupancies.
Reference Sources:
International Building Code (IBC) 2021 - Section 602.4 (Type IV Construction Requirements) IBC Table 601 (Fire-Resistance Ratings for Building Elements) ICC Fire Inspector II Study Guide (2021)

NEW QUESTION # 74
Given: In automobile refinishing spray booths where drying by heat is done in the spray booth, the spray booth shall be equipped with interlocks between the spraying and drying apparatus and the ventilating system.
These interlocks shall be arranged to purge the spray vapors from the spray booth for a minimum period of __ minutes before the drying apparatus can be operated.

A. 0
B. 1
C. 2
D. 3

Answer: C

Explanation:
In automobile refinishing spray booths where drying by heat occurs inside the same spray booth, fire codes require interlocks to prevent ignition hazards.
Before activating the drying apparatus, the ventilation system must purge the booth of spray vapors for at least
5 minutes to remove flammable concentrations.
Reference to Fire Inspector Documentation:
1. 2021 International Fire Code (IFC) - Section 2404.7.3 (Drying Operations in Spray Booths) IFC 2404.7.3 mandates that spray booths must have interlocks to purge vapors for a minimum of 5 minutes before activating the drying process.
This ensures that flammable vapors are removed before heat sources operate, reducing fire risks.
2. NFPA 33 - Standard for Spray Application Using Flammable or Combustible Materials (2021 Edition) - Section 15.4.6 NFPA 33, Section 15.4.6 confirms the requirement for a 5-minute ventilation purge cycle before heat drying.
Detailed Explanation of Answer Choices:
Option A (Incorrect): 2 minutes is insufficient for adequate vapor removal.
Option B (Incorrect): 3 minutes does not meet the minimum safety requirement.
Option C (Incorrect): 4 minutes is slightly below the code-mandated requirement.
Option D (Correct): 5 minutes is the minimum required purge time per IFC 2404.7.3 and NFPA 33.
Thus, the correct and verified answer is: D. 5.

NEW QUESTION # 75
A Type I handrail that is not circular shall have a minimum perimeter dimension of ___ inches.

A. 0
B. 1
C. 6.25
D. 1.25

Answer: C

Explanation:
According to the 2021 International Fire Code (IFC) and the International Building Code (IBC) Section
1014.3, handrails are categorized into Type I and Type II based on their shape and size requirements.
Type I handrails refer to those that are not circular in shape but still comply with graspability requirements.
IBC Section 1014.3.1 states that:
If a handrail is not circular, it must have a perimeter dimension between 4 inches (minimum) and 6.25 inches (maximum).
The cross-section of such a handrail should provide an adequate grasping surface.

NEW QUESTION # 76
......

Our Fire-Inspector-II study materials are compiled by domestic first-rate experts and senior lecturer and the contents of them contain all the important information about the test and all the possible answers of the questions which maybe appear in the test. You can use the practice test software to check your learning outcomes. Our Fire-Inspector-II study materials’ self-learning and self-evaluation functions, the statistics report function, the timing function and the function of stimulating the test could assist you to find your weak links, check your level, adjust the speed and have a warming up for the real exam. You will feel your choice to buy Fire-Inspector-II Study Materials are too right.

Valid Fire-Inspector-II Test Camp: https://www.topexamcollection.com/Fire-Inspector-II-vce-collection.html

International Code Council Fire-Inspector-II Hot Questions All we sell are the latest and valid, 100% for sure, With professional experts to compile the Fire-Inspector-II exam dumps, they are high- quality, TopExamCollection Valid Fire-Inspector-II Test Camp offers International Code Council Valid Fire-Inspector-II Test Camp practice tests which provide you with real examination scenarios, International Code Council Fire-Inspector-II Hot Questions They will solve your questions in time.

For this example, we'll add a bookmark for the front cover Fire-Inspector-II of a presentation, I'll tell you how in a minute, All we sell are the latest and valid, 100% for sure.

With professional experts to compile the Fire-Inspector-II Exam Dumps, they are high- quality, TopExamCollection offers International Code Council practice tests which provide you with real examination scenarios.

Prepare with Actual Fire-Inspector-II Exam Questions to Get Certified in First Attempt

They will solve your questions in time, There are Reliable Fire-Inspector-II Real Test two main reasons that contribute to it, the first one is that our education experts are very skilled with those exam questions and answers involved in the Fire-Inspector-II actual test, and we can always get one-hand information resource.

0

Course Enrolled

0

Course Completed

Jack Hunt Jack Hunt

About me

Pass Guaranteed Unparalleled Fire-Inspector-II - 67 - Fire Inspector II Exam Hot Questions

2025 International Code Council Fire-Inspector-II: 67 - Fire Inspector II Exam –Trustable Hot Questions

International Code Council 67 - Fire Inspector II Exam Sample Questions (Q71-Q76):

Prepare with Actual Fire-Inspector-II Exam Questions to Get Certified in First Attempt

0

0

Sign in